Wood hangers should encounter water as little as possible, which will reduce the service life. Usually use a soft cloth to follow the texture of the wood, dust the hangers, do not wipe with a dry cloth, it will wipe the surface. Try to avoid contact with corrosive liquids, alcohol, nail polish, etc. on the surface of wooden hangers. At the same time, do not fall from the high to the ground, the metal parts should not touch the sweat as much as possible, which will produce a chemical reaction and embroider. In short, wooden hangers are more practical and have a long service life in all hangers.
Wood is a kind of biological organism. It is the most widely touched green natural product. There are many kinds of wood in the hanger factory to make wooden hangers, such as eucalyptus, lotus, rubberwood, ash, black walnut, pine, and miscellaneous wood. If it is not properly disposed of, the wooden hanger will show signs of rot, cracking, deformation, and dirt.
1. The wooden hangers are placed in a dry and dry local climate, and the painted hangers are easy to fall, which is a common appearance. This can be prevented. The wooden hangers should be placed in a place where they can be exposed to the sun. They should be placed in an environment where the ventilation and dry humidity are suitable. Do not perform maintenance in the sun or on a rainy day.
2. There is dust on the paint hangar. You can use a soft cloth to follow the wood grain. Dust off the hanger. Before dusting, apply a spray on the soft cloth (Bi Lizhu). Do not wipe with a dry cloth. To prevent rubbing flowers. In general, maintenance products such as Bi Lizhu are a good choice for the maintenance of such wood products. Bi Lizhu can make it look like a maintenance film, waterproof, dustproof and scratch resistant. The hanger factory gives the wood a deeper moisturizing and maintenance, which makes the wood full of light, delaying their gradual fading, cracking, shelling and aging appearance due to sunlight or ultraviolet light. And easy to use, one spray and one wipe, dust removal, glazing, maintenance, and one end.
3. If the wooden hanger is disposed of too dry, it is very simple to crack and crack. If it is found that there are some cracks or cracks, the maintenance products can be squeezed into the cracks by small tools to prevent them from continuously expanding. After long-term use of wooden hangers, the appearance of the wooden hangers will be cracked, so the usual cleaning and maintenance operations cannot be too sneak.
4, hanger factory demand often continue to adhere to the cleaning of the hanger, do not let the dust on the surface of the wood for a long time attached to the appearance of the wood, resulting in the formation of dust, will not be eradicated.
5, the deformation of the hanger, the first is because the water content of the wood is too much, the temperature is too high, perhaps the hanging clothes exceed the weight of the hanger. In the process of maintenance, pay attention to the ventilation and dry humidity of the wardrobe, and select the appropriate hanger according to the weight of the clothes.
