Self-made multifunctional clothes hanger materials and tools
A piece of wood with a length of 50cm and a width of 35cm, a piece of wood with a length of 32cm and a width of 1cm, two porcelain bottles with a diameter of 4cm and a diameter of 6cm, #10 iron wire, several colored plastic sleeves, steel nails, scissors, and wire cutters.
Multifunctional drying rack manufacturing method one
1. Use steel nails to nail two porcelain bottles with a diameter of 4cm at the 0.5cm on both ends of the wooden strip;
2. Nail a steel nail 10 cm upward from the midpoint of the wooden strip, and then nail a steel nail at a position 0.5 cm to the right from the steel nail upwards 2 cm;
3. First draw a cross in the center of a 50cm long and 35cm wide wooden board, and nail a 32cm long and 1cm wide wooden strip parallel to the top 5cm from the bottom;
4. Use steel nails 18 cm above the midpoint of the wooden strip to nail a 6cm diameter wire porcelain bottle and nail a steel nail to the lower left position of the porcelain bottle. The clothes hanger is made of mold.
Method 2 of making multifunctional clothes hangers
Tools: We need to prepare a bundle of stainless steel wire, the radius of the wire is preferably one millimeter, some small clamps, and some wooden strips.
Steps: We first cut the iron wire into a 40-long section, then fold it into the basic shape of a hanger, and then fix the bottom section of the iron wire with a wooden strip, and then use a thin iron wire to connect the two ends of the wooden strip with the thick Fix it with the iron wire, then fold the hook of the hanger into an M shape, then fix the M shape with a small wooden strip, and then fix the clip on the two top ends of the M shape, so that the socks can be dried together with the clothes.
Finally, fix the two clips symmetrically on the two sides of the hanger, so that the remaining small items to be dried can be dried together.
Method 3 of making multifunctional clothes hangers
Production method: It consists of two plastic parts, one part is used for suspension, the other part is used for support, and the most creative part is that the support part is designed with elasticity. In this way, when hanging the T-shirt, you only need to grasp the elastic part and hold it inward, and the supporting part can be contracted, so that you can easily insert the T-shirt from the neckline and then release your hand. In this way, the T-shirt will hold up.
1. Scissors hangers
2. The shape is like a big pair of scissors
3. You can easily put the hanger directly in from the collar of the clothes
4. In terms of usage, this peculiar hanger can be easily inserted directly from the collar of the clothes just like the “elastic hanger”. However, this design uses a completely different structure. Its shape is like a large pair of scissors, which can be opened and closed in a large range, so that the clothes hanger can be directly stretched into the collar and then unfolded for hanging.
